News

The standard measurement of ring is called finger size. Modern size is marked by number, for example, the size of Asians is from No. 8 to 28. During purchasing, the best status is tightly wearing in summer while turn but not drop in winter. When wearing the ring, you can round it with red line or thread if it is too lax, or put a little soap in finger to take the ring off.

Perimeter of finger: the lines refer to the length of a circle around the finger

Inside diameter: internationally recognized methods to determine ring size. Since different brands of jewelry stores, the size used are also different, for example, named 16mm as No. 12 or No. 9… Please enquire about “inside diameter” to jewelry stores directly if you want to get the size of ring through jewelry stores measure. (the unit is mm)

To measure the ring size:
1. Make a circle round hoop with iron wire which simulates ring to round your finger, the hoop should be suitable, fixed and marked. Then measure perimeter after remove the hoop to expand to be a line and check the corresponding number according to perimeter. If your size is between the two dimensions, it’s better to choose smaller one (Don’t measure with cotton or paper which may caused a larger error. Don’t measure the finger root directly, but make circularity to ensure that the fingers through because of thicker knuckle)

2. Choose a suitable ring for you, keep flat and measure the largest inside diameter to get your own number.

Note:
  1. Please measure your fingers in the evening or night, because the finger size is the biggest in that period of time.
  2. Don’t measure in cold feeling of hands
  3. Ring girth should be bigger than normal size when wearing a wider design ring
  4. Date in this table based on the International Girth, inside diameter based on inner ring.